Dynamic deformation properties of medium-Mn multi-phase steels containing retained austenite

Okitsu, Takayuki*; Hojo, Tomohiko*; Morooka, Satoshi; Miyamoto, Goro*

Tetsu To Hagane, 110(3), p.260 - 267, 2024/02

https://doi.org/10.2355/tetsutohagane.TETSU-2023-065

Dynamic probabilistic risk assessment of nuclear power plants using multi-fidelity simulations

Zheng, X.; Tamaki, Hitoshi; Sugiyama, Tomoyuki; Maruyama, Yu

Reliability Engineering & System Safety, 223, p.108503_1 - 108503_12, 2022/07

https://doi.org/10.1016/j.ress.2022.108503

Water experiments on thermal striping phenomena at the core outlet of an advanced sodium-cooled fast reactor, 1; Proposal of countermeasures to mitigate temperature fluctuations around control rods

Kobayashi, Jun; Aizawa, Kosuke; Ezure, Toshiki; Kurihara, Akikazu; Tanaka, Masaaki

Hozengaku, 20(3), p.89 - 96, 2021/10

Hot sodium from the fuel assembly can mix with cold sodium from the control rod (CR) channel and the blanket assemblies at the bottom plate of the Upper Internal Structure (UIS) of Advanced-SFR. Temperature fluctuation due to mixing of the fluids at different temperature between the core outlet and cold channel may cause high cycle thermal fatigue on the structure around the bottom of UIS. A water experiment using a 1/3 scale 60 degree sector model simulating the upper plenum of the Advanced-SFR has been conducted to examine countermeasures for the significant temperature fluctuation generated around the bottom of UIS. We focused on the temperature fluctuations near the primary and backup control rod channels, and studied the countermeasure structure to mitigate the temperature fluctuation through temperature distribution and flow velocity distribution measurements. As a result, effectiveness of the countermeasure to mitigate the temperature fluctuation intensity was confirmed.

Recent progress of laser stripping POP demonstration study at J-PARC RCS

Saha, P. K.; Harada, Hiroyuki; Yoneda, Hitoki*; Michine, Yurina*; Fuchi, Aoi*; Sato, Atsushi*; Shibata, Takanori*; Kinsho, Michikazu

Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.656 - 660, 2021/10

https://www.pasj.jp/web_publish/pasj2021/proceedings/PDF/WEP0/WEP020.pdf

Consideration of triple-harmonic operation for the J-PARC RCS

Okita, Hidefumi; Tamura, Fumihiko; Yamamoto, Masanobu; Nomura, Masahiro; Shimada, Taihei; Yoshii, Masahito*; Omori, Chihiro*; Sugiyama, Yasuyuki*; Hasegawa, Katsushi*; Hara, Keigo*; et al.

Proceedings of 12th International Particle Accelerator Conference (IPAC 21) (Internet), p.3020 - 3022, 2021/08

https://doi.org/10.18429/JACoW-IPAC2021-WEPAB177

In the J-PARC RCS, the dual-harmonic operation, in which each RF cavity is driven by superposition of the fundamental accelerating voltage and the second harmonic voltage, are employed. The dual-harmonic-operation significantly improves the bunching factor and is indispensable for acceleration of the high intensity beams. The original LLRF control system was replaced with the new system in 2019, which can control the amplitudes of the higher harmonics as well as the fundamental and second harmonics. Therefore we consider to use additionally the third harmonic voltage for further improvement of the bunching factor during acceleration. By the triple-harmonic operation, the flat RF bucket can be realized and beam simulation results indicate that the bunching factor can be improved about 30% at maximum. In this presentation, we describe the longitudinal simulation studies of the triple-harmonic operation. Also the preliminary test results are presented.

Mechanism of improved ductility of 1500 MPa-class ultra-high strength cold-rolled steel sheet produced by rolling and partitioning method

Hosoya, Yoshihiro*; Matsumura, Yuta*; Tomota, Yo*; Onuki, Yusuke*; Harjo, S.

ISIJ International, 60(9), p.2097 - 2106, 2020/09

https://doi.org/10.2355/isijinternational.ISIJINT-2020-027

A Study of surface stripper for the AMS system with a footprint below 2 m 2 m

Matsubara, Akihiro; Fujita, Natsuko; Kimura, Kenji

Proceedings of the 8th East Asia Accelerator Mass Spectrometry Symposium and the 22nd Japan Accelerator Mass Spectrometry symposium (EA-AMS 8 & JAMS-22), p.57 - 59, 2020/00

no abstracts in English

Investigations of accelerator reliability and decay heat removal for accelerator-driven system

Sugawara, Takanori; Takei, Hayanori; Tsujimoto, Kazufumi

Annals of Nuclear Energy, 125, p.242 - 248, 2019/03

https://doi.org/10.1016/j.anucene.2018.11.001

To realize the feasible accelerator-driven system (ADS) concept, the investigations for the reliable accelerator and conceptual plant design considering safety issues were performed. As the reliable accelerator concept, the double-accelerator concept was proposed to reduce the beam-trip frequency. The estimated beam-trip frequency with the double-accelerator concept using the J-PARC LINAC operation data showed that the beam-trip frequency was significantly improved with the comparison of the single accelerator result. The basic investigation of the primary reactor auxiliary coolant system (PRACS) was performed for the safety design of the LBE cooled ADS. The concept which the PRACS heat exchanger was integrated to the steam generator was proposed and the transient analysis in the loss of heat sink accident was carried out. The result presented that the decay heat removal was appropriate when the operation of the PRACS succeeded.

Research and development activities for accelerator-driven system in JAEA

Sugawara, Takanori; Takei, Hayanori; Iwamoto, Hiroki; Oizumi, Akito; Nishihara, Kenji; Tsujimoto, Kazufumi

Progress in Nuclear Energy, 106, p.27 - 33, 2018/07

https://doi.org/10.1016/j.pnucene.2018.02.007

The Japan Atomic Energy Agency (JAEA) has investigated an accelerator-driven system (ADS) to transmute minor actinides which will be partitioned from the high level waste. There are various inherent issues for the research and development on the ADS. The recent two activities to realize a feasible and reliable ADS concept are introduced in this paper. For the feasibility, the design of a beam window which is a boundary of the accelerator and the subcritical core, is one of the most important issues. To mitigate the design condition of the beam window, namely to reduce the proton beam current, the subcritical core concept with subcriticality adjustment rods were investigated. For the reliability, the beam-trip is the inherent and serious issue for the ADS design because it induces rapid temperature change to coolant and structures in the subcritical core. To improve the beam-trip frequencies, a double-accelerator concept was proposed and its beam-trip frequency was estimated.

Countercurrent extraction/stripping experiments using TDdDGA solvent extractant in a centrifugal contactor system,2; Evaluation on the improved flowsheet for MA recovery

Kibe, Satoshi; Fujisaku, Kazuhiko*; Sakamoto, Atsushi; Sano, Yuichi; Takeuchi, Masayuki; Suzuki, Hideya; Tsubata, Yasuhiro; Matsumura, Tatsuro

JAEA-Research 2016-024, 40 Pages, 2017/02

JAEA-Research-2016-024.pdf:6.73MB

The Japan Atomic Energy Agency has been developing some flowsheets with TDdDGA (N,N,N,Ntetradodecyldiglycolamide) extractant to recover MA (minor actinide) from raffinate. In this study, countercurrent experiments with the improved flowsheet, e.g. the addition of alcohol into the solvent for preventing the precipitation, were performed using miniature centrifugal contactors in order to compare the extraction/stripping behavior of each element with the mixer-settler type. As a result, no entrainments were observed and sufficient phase separation was achieved by centrifugal contactors without any abnormal fluid behavior, such as overflow. The extraction and stripping of Ln(III) which show the similar tendencies as MA could be achieved successfully, especially their stripping proceeded more efficiently in centrifugal contactors. This might be due to the increase in stripping rates by improving the flowsheet and to superior phase separation performance of centrifugal contactors.